### Digital Clock On LCD (16x2) PIC16F1937 Used In FlowCode Programming and Simulation

In this sample project we are using FlowCode Simulation Software for Programming and Testing with PIC16F1937.It shows how to use and simulate and program LCD for use in different projects.In this Project we have created digital clock(Using two digit each for seconds minute and hours in 24 Hour format on LCD) on 16x2 Liquid Crystal Display.Varying the delay and write-erase sequence can be manipulated to get desired result.

Here is the Flow code program:
LCD(16x2) Display Related Programs
ADC-Voltage as Float(LCD with PIC16F1937)
ADC-Voltage as String (LCD with PIC16F1937)
ADC Sampling and outputting to a LCD(LCD with PIC16F1937)
Printing Number on 16x2 LCD Display with PIC16F88
Printing and Updating Number on 16x2 LCD Display
Printing a Two line(String) message (LCD 16x2)
Printing a formatted number on ( LCD 16x2 ) Using PIC16F88

LCD (Liquid Crystal Display 16X2):-
Its screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very…

### NAND Logic Gate - Boolean Algebra in Digital Electronics - Proteus Simulation

Logic Gates- NAND Gate

This is a NOT-AND gate which is equal to an AND gate followed by a NOT gate. The outputs of all NAND gates are high if any of the inputs are low. The symbol is an AND gate with a small circle on the output. The small circle represents inversion.

Logic Table

Logic Gates- AND Gate
Logic Gates- OR Gate
Logic Gates- NOT Gate
Logic Gates- NOR Gate
Proteus Tutorials with Examples - Home Page - Index
Symbol

Proteus Simulation:-NAND Gate Using Switches and LED

1. Hello my dear friends,
To crack the Gate Exam you need the books which cover all the syllabus of gate as well as you need a very good gate mock test series for practice.

1. Thanks Shruti for your useful info, Hope our readers will be benefited by your suggestion.

### Digital Clock On LCD (16x2) PIC16F1937 Used In FlowCode Programming and Simulation

In this sample project we are using FlowCode Simulation Software for Programming and Testing with PIC16F1937.It shows how to use and simulate and program LCD for use in different projects.In this Project we have created digital clock(Using two digit each for seconds minute and hours in 24 Hour format on LCD) on 16x2 Liquid Crystal Display.Varying the delay and write-erase sequence can be manipulated to get desired result.

Here is the Flow code program:
LCD(16x2) Display Related Programs
ADC-Voltage as Float(LCD with PIC16F1937)
ADC-Voltage as String (LCD with PIC16F1937)
ADC Sampling and outputting to a LCD(LCD with PIC16F1937)
Printing Number on 16x2 LCD Display with PIC16F88
Printing and Updating Number on 16x2 LCD Display
Printing a Two line(String) message (LCD 16x2)
Printing a formatted number on ( LCD 16x2 ) Using PIC16F88

LCD (Liquid Crystal Display 16X2):-
Its screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very…

### Motor Types- Special Types of Motor

Motor Types- Special Types of Motor
1. Iron less or core-less rotor motorNothing in the principle of any of the motors described above requires that the iron (steel) portions of the rotor actually rotate. If the soft magnetic material of the rotor is made in the form of a cylinder, then (except for the effect of hysteresis) torque is exerted only on the windings of the electromagnets. Taking advantage of this fact is the core less or iron less DC motor, a specialized form of a PM DC motor. Optimized for rapid acceleration, these motors have a rotor that is constructed without any iron core. The rotor can take the form of a winding-filled cylinder, or a self-supporting structure comprising only the magnet wire and the bonding material. The rotor can fit inside the stator magnets; a magnetically soft stationary cylinder inside the rotor provides a return path for the stator magnetic flux.

### Sending String with PIC16F877A Using Serial RS232 -Flowcode Simulation

Here we are using Flow-code Simulation Software for Programming and Testing with PIC16F877A for Simulation of this project .It shows how to send string and character through serial port.

Flow-code has following facility regarding Serial Communication:
1. Character Sent
3. Character in Queue

Here is the Flow code program:
More Post On Serial Communication
Serial RS232-Simple Echo Send and Receive- PIC16F88
Serial RS232 -String Receivev with PIC16F877A
RS232 and RS485 Comparative Study

In this project we are using LCD display for displaying sent string.Setting used can be seen in the video.We are sending " TechInventory "  and " RS232 Working " string through RS232 Serial port.Micro-controller used is PIC16F877A with 16X2 LCD display.

### INDEX-Tutorials for Flow Code Programming and Simulation

Categorized Topics
We are using Flow Code Simulation Software from MATRIX for Programming and Testing,You will find topics from Flow Code Programming and Simulation.You can request a topic here.If some links are not working please let me know.
Flowcode is one of the world's most advanced graphical programming languages for micro-controllers. The great advantage of Flowcode is that it allows those with little to no programming experience to create complex electronic systems in minutes. Flowcode is available in multiple languages and currently supports the PICmicro, dsPIC, PIC24, AVR/Arduino and ARM series of micro controllers.You can Download the Demo Software HERE.

INDEX
Seven Segment LED Display
Using Seven Segment with PIC16F88Counting using loops(Seven Segment with PIC16F88)Counting switch presses(Seven Segment with PIC16F88)
Timers and Counters
Timed Counter And Use of Timer Interrupt(PIC16F88)
ADC Simulation In Flow CodeServo with ADC control input ,Flow Code Simulati…

### Timed Counter And Use of Timer Interrupt Using PIC16F88 Microcontroller - Flow Code Simulation

Flow Code-Timed Counter And Use of Timer Interrupt(PIC16F88)

In this example of counting seconds using Timed Counter and Timer Interrupt.In this example we are using 7 Segment Display to display the results of calculation as seen in the examples code and videos.

Here is the MACRO for Interrupt Program Code:

Here is the Flow code MAIN program:
Complete list of projects:
Tutorials for Flow Code Programming and Simulation

### Motor Types- DC Motor

Motor Types- DC Motor Shunt DC motor: The rotor and stator windings are connected in parallel.Separately Excited motor: The rotor and stator are each connected from a different power supply, this gives another degree of freedom for controlling the motor over the shunt.Series motor: the stator and rotor windings are connected in series. Thus the torque is proportional to I*I  so it gives the highest torque per current ratio over all other DC motors.It is therefore used in starter motors of cars and elevator motors.For more related information please refer:
Motor Types-Introduction
Motor Types- DC Motor
Motor Types- AC Motor
Motor Types- Special Types of Motor
Servo Motors
Stepper Motor

### Stepper Motors Examples with PIC16F88 -Flowcode Simulation

We are using FlowCode Simulation Software for Programming and Testing with PIC16F88 for Simulation of this project .It shows how to use and simulate and program Stepper Motors for use in different projects.

For concept of Different types of Motors and their properties please see:
Motor Types-Introduction
Motor Types- DC Motor
Motor Types- AC Motor
Motor Types- Special Types of Motor
Servo Motors
Here is the Flow code program:
Three Stepper are used to depict different configurations in which they can be used .Here functionality of auto off capability is used.It can be programmed to moved back to its original position if required.

More related Post :
Stepper motor Control using switches(Flow Code Simulation)
Stepper with switch control- Auto Off with PIC16F88

Here is the complete list of projects:
Tutorials for Flow Code Programming and Simulation

### Fibonacci Series Using Array And For Loop - C Programming Examples

As we have started C Programming coding with Example Series, We have published last posts
"Write A Program For SUM of Infinite HP"

"Write A Program To Find SUM of AP" and

"Write A Program To Find SUM of GP Sequence".

We have chosen to start with Arithmetic Series and in this post you will find some basic idea and some useful concepts about Fibonacci Numbers .You can download C Codes below.Please let us know your feedback.

In this post we are doing again Fibonacci Series but with different approach.In last post "Fibonacci Progression Using While Loop" you will see how to generate Fibonacci Numbers by using concepts of  Do-While Loop.In this post we will talk about another loop i.e. For Loop and side by side Concept of Arrays will be discussed and demonstrated.
Fibonacci Series - Sequence ( Using Array And For Loop ) Video Tutorial(See C- Codes Below ):

For Loop Concept: FOR Loops are the most useful type. The syntax for a for loop is  for ( variable init…

### Pulse Width Modulation,Simulation Micro controllers(PIC16F877)

Pulse Width Modulation,Simulation Micro controllers(PIC16F877)
This simulation depicts generation of PWM waves using Flow Code Simulation techniques.It will help to understand how to control speed of DC motor using PWM in controllers.

You may also like :
Servo with ADC control input
Stepper motor Control using switches
ADC Simulation In Flow Code
Pulse Widht Modulation Simulation in Microcontrollers(PIC16F877)

Here is the complete list of projects:
Tutorials for Flow Code Programming and Simulation

Pulse-width modulation (PWM), or pulse-duration modulation (PDM), is a technique used to encode a message into a pulsing signal. It is a type of modulation. Although this modulation technique can be used to encode information for transmission, its main use is to allow the control of the power supplied to electrical devices, especially to inertial loads such as motors. In addition, PWM is one of the two principal algorithms used in photovoltaic solar battery chargers,the other being MPPT.

### Printing a Two line(String) message (LCD 16x2) PIC16F88 FlowCode Programming and Simulation

We have been using FlowCode Simulation Software for Programming and Testing with PIC16F88.It shows how to use and simulate and program LCD for use in different projects.In this Project we are printing two line message on 16x2 LCD Display.In First line "Ingenuity Dias" is continuously displayed and in second line "tech-inventory" is displayed.Varying the delay and write-erase sequence can be manipulated to get desired result.

Here is the Flow code program:
LCD(16x2) Display Related Programs
ADC-Voltage as Float(LCD with PIC16F1937)
ADC-Voltage as String (LCD with PIC16F1937)
ADC Sampling and outputting to a LCD(LCD with PIC16F1937)
Printing Number on 16x2 LCD Display with PIC16F88
Printing and Updating Number on 16x2 LCD Display