Header Ads

Printing a formatted number on ( LCD 16x2 ) Using FlowCode Programming and Simulation (PIC16F88)

Using FlowCode Simulation Software for Programming and Testing with PIC16F88.It shows how to use and simulate and program LCD for use in different projects.In this Project we are printing formatted number(Using Three digit on LCD) on 16x2 LCD Display.Varying the delay and write-erase sequence can be manipulated to get desired result.

Here is the Flow code program:

Micro-controller used is PIC16F88 with 16x2 LCD for printing formatted numbers on LCD screen.You can change the no of places as per your requirement and delay to display the it.

LCD (Liquid Crystal Display 16X2) 
Its screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments and other multi segment LEDs. The reasons being: LCDs are economical; easily programmable; have no limitation of displaying special & even custom characters (unlike in seven segments), animations and so on.


A 16x2 LCD means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in 5x7 pixel matrix. This LCD has two registers, namely, Command and Data.

The command register stores the command instructions given to the LCD. A command is an instruction given to LCD to do a predefined task like initializing it, clearing its screen, setting the cursor position, controlling display etc. The data register stores the data to be displayed on the LCD. The data is the ASCII value of the character to be displayed on the LCD. Click to learn more about internal structure of a LCD.

In video you will be able to see step-wise execution of program and their effect on LCD in panel which is by default in the software .

Flow code Simulation and how to do Video Tutorial:

You can Download Flowcode Program File :
C Code File
Flow Code Program File


Here is the complete list of projects:

Tutorials for Flow Code Programming and Simulation

No comments